ALDON CORPORATION -- KM00760M, SULFUR: ROLL, SUBLIMED PWD., PRECIPITATED  -- -
<pre>=====================  Product Identification  =====================

Product ID:KM00760M, SULFUR: ROLL, SUBLIMED PWD., PRECIPITATED
MSDS Date:11/15/1996
FSC:NIIN:Submitter:D DG
Status Code:A
=== Responsible Party ===
Company Name:ALDON CORPORATION
Address:1533 W HENRIETTA RD
City:AVON
State:NY
ZIP:14414-9508
Country:US
Info Phone Num:716-226-6177
Emergency Phone Num:716-226-6177
Resp. Party Other MSDS Num.:SS 1085
Preparer's Name:MICHAEL RASZEJA
Chemtrec Ind/Phone:(800)424-9300
CAGE:6V042
=== Contractor Identification ===
Company Name:AL-DON CHEMICALS INC
Address:1533 W HENRIETTA RD
Box:City:AVON
State:NY
ZIP:14414-9508
Country:US
Phone:716-226-6177
CAGE:6V042
Company Name:NASCO INTL INC., NASCO DIV
Address:901 JANESVILL AVE
Box:City:FORT ATKINSON
State:WI
ZIP:53538-0901
Country:US
Phone:920-563-2446
Contract Num:MDA414-01-P-0615
CAGE:33089

=============  Composition/Information on Ingredients  =============

Ingred Name:SULFUR
CAS:7704-34-9
RTECS #:WS4250000
= Wt:100.

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SULFUR IS ESSENTIALLY NON-TOXIC EITHER
    THROUGH INGESTION, INHALATION OR SKIN CONTACT. THERE ARE, HOWEVER,
    SOME INDIVIDUALS WHO MAY BE ALLERGIC AND MUST NOT BE PERMITTED IN
    THE AREA OF EXPOSURE. SULFUR  IS AN EYE IRRITANT, BUT IF PROMPT
    TREATMENT IS APPLIED NO LASTING INJURY WILL RESULT.
Effects of Overexposure:SULFUR IS ESSENTIALLY NON-TOXIC EITHER THROUGH
    INGESTION, INHALATION OR SKIN CONTACT. THERE ARE, HOWEVER, SOME
    INDIVIDUALS WHO MAY BE ALLERGIC AND MUST NOT BE PERMITTED IN THE
    AREA OF EXPOSURE. SULFUR  IS AN EYE IRRITANT, BUT IF PROMPT
    TREATMENT IS APPLIED NO LASTING INJURY WILL RESULT.

=======================  First Aid Measures  =======================

First Aid:REMOVE INDIVIDUAL WHO SHOW ALLERGIC REACTION PROMPTLY FROM
    EXPOSURE AREA. SYMPTOMS SHOULD DISAPPEAR. EYE: FLUSH THOROUGHLY
    WITH WATER FOR AT LEAST 15 MINUTES, LIFTING LOWER AND UPPER EYELIDS
    OCCASIONA LLY. GET IMMEDIATE MEDIAL ATTENTION. SKIN: FLUSH
    THOROUGHLY WITH WATER, THEN WASH WITH MILD SOAP AND WATER.
    INHALTION: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
    RESPIRATION. IF BREATHING  IS DIFFICULT, GIVE OXYGEN. GET MEDICAL
    ATTENTION. INGESTION: IF SWALLOWED, IF CONSCIOUS, GIVE 2 OR MORE
    GLASSES OF WATER TO DRINK. INDUCE VOMITING. GET MEDICAL ATTENTION
    IMMEDIATELY. NEVER GIVE ANYTHI NG BY MOUTH TO AN UNCONSCIOUS
    PERSON.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:=207.C, 404.6F
Autoignition Temp:=248.C, 478.4F
Lower Limits:3.3
Upper Limits:46.0
Extinguishing Media:USE WATER FOG.
Fire Fighting Procedures:IN FIRE CONDITIONS, WEAR A NIOSH/MSHA APPROVED
    SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING.
    USE WATER FOG; AVOID STRAIGHT STREAMS WHICH WILL SCATTER MOLTEN
    SULFUR AND DUST. SMALL F IRES MAY BE EXTINGUISHED WITH SAND OR
    ADDITIONAL SULFUR. FIRE CAN REKINDLE IF NOT COOLED BELOW 154C
    (310F).
Unusual Fire/Explosion Hazard:EASILY IGNITIBLE/COMBUSTIBLE SOLID.
    DUST/VAPOR FORMS EXPLOSIVE MIXTURE WITH AIR. HAZARDOUS WITH
    OXIDIZING MATERIAL, FORMING EXPLOSIVE MIXTURE. EXPLOSION HAZARD:
    MODERATE, IN FORM OF DUST, WHEN EXPOSED  TO FLAMES. DANGEROUS WHEN
    HEATED EMITS HIGHLY TOXIC FUMES OF OXIDES OF SULFUR, CAN REACT WITH
    OXIDIZING MATERIAL.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE NON-SPARKING TOOLS. PROVIDE VENTILATION IN
    SPILL AREA. AVOID CREATING DUST. SWEEP UP AND PLACE IN SUITABLE
    CONTAINER FOR RECLAMATION OF DISPOSAL IN AN APPROVED FACILITY.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL DRY WELL-VENTILATED
    AREA AWAY FROM HEAT, SPARKS, FLAMES AND OXIDIZING AGENTS. AVOID
    CREATING DUST. ALL ELECTRIC MOTORS IN SULFUR WORKING AREAS SHOULD
    BE OF THE EXPLOSIVE PROOF TYPE. WA SH THOROUGHLY AFTER HANDLING.
    KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES. AVOID BREATHING
    DUST. USE WITH ADEQUATE VENTILATION. USE NON-FERROUS TOOLS TO
    REDUCE SPARKING. REMOVE AND WASH CONTAMINATED CLOTHING BEFORE
    REUSE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED IN NORMAL LABORATORY
    HANDLING. IF DUSTY CONDITIONS PREVAIL, WORK IN A FUME HOOD OR WEAR
    NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST/ MECHANICAL (GENERAL): RECOMMENDED.
Protective Gloves:RUBBER
Eye Protection:CHEMICAL SAFETY GLASSES/GOGGLES
Other Protective Equipment:SMOCK, APRON, EYE WASH STATION, VENT HOOD,
    FIRE EXTINGUISHER.
Supplemental Safety and Health
SYNONYMS: SULFUR FLOWER. SULFUR FLOUR, ROLL. UNIT SIZE: UP TO 2.5 KG.
    NASCO # KM00760M.

==================  Physical/Chemical Properties  ==================

HCC:F8
Boiling Pt:=444.C, 831.2F
Melt/Freeze Pt:M.P/F.P Text:110-119C (230-246F)
Vapor Pres:0@138C
Spec Gravity:2.07
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW POWDER, CRYSTALS OR ROLLS (BROKEN LUMPS);
    FAINT ODOR OF ROTTEN EGGS.
Percent Volatiles by Volume:NEGLIGIBLE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
REACTS VIOLENTLY WITH STRONG OXIDIZING AGENTS. CORROSIVE TO COPPER AND
    COPPER ALLOYS. DAMP SULFUR WILL CORRODE STEEL.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES AND OTHER HEAT
    SOURCES.
Hazardous Decomposition Products:SULFUR DIOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:SULFUR, 4.1, UN1359, PG III.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.