BORDEN, INC -- KRYLON FLUORESCENT SPRAY PAINT, 3107  -- 8010-00F003731
<pre>=====================  Product Identification  =====================

Product ID:KRYLON FLUORESCENT SPRAY PAINT, 3107
MSDS Date:01/01/1987
FSC:8010
NIIN:00F003731
=== Responsible Party ===
Company Name:BORDEN, INC/COLUMBUS, OHIO 43215
Emergency Phone Num:(614) 457-5200
CAGE:EO431
=== Contractor Identification ===
Company Name:BORDEN, INC/COLUMBUS, OHIO 43215
CAGE:EO431
Company Name:KRYLON PRODUCTS
Address:31500 SOLON ROAD
Box:City:SOLON
State:OH
ZIP:44139
Country:US
Phone:800-832-2541/216-566-2917
CAGE:87187

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 12.0%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Ingred Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 16.0%

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 12.0%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:HEXANE (N-HEXANE)
CAS:110-54-3
RTECS #:MN9275000
Fraction by Wt: 18.0%
OSHA PEL:500 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:N-HEPTANE
CAS:142-82-5
RTECS #:MI7700000
Fraction by Wt: 17.0%
OSHA PEL:500 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9293

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION: MAY BE HARMFUL IF INHALED. LIQUID
    OR CAUSE IRRITATION NOSE, THROAT AND LUNGS.

=======================  First Aid Measures  =======================

First Aid:INGESTION: IF SWALLOWED, DON'T INDUCE VOMITING. INHALATION:
    REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE OXYGEN. SKIN:
    FLUSH W/WATER. EYE: FLUSH W/WATER FOR AT LEAST 15 MINUTES. CALL A
    PHYSICI AN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE DRY CHEMICAL, FOAM OR CO2
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE. WATER COOL
    CONTAINERS.
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMP CAUSE BURSTING.
    DON'T PUNCTURE OR INCINERATE CONTAINER. DON'T SPRAY NEAR FLAME

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP WITH
    ABSORBENT MATERIAL AND REMOVE TO A CHEMAL DISPOSAL AREA. PREVENT
    ENTRY INTO NATURAL BODIES OF WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE AT TEMPERATURES >120F.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION
    EQUIPMENT IF >TLV.
Ventilation:PROVIDE VENTILATION TO KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS GLOVES AS REQUIRED TO
    PREVENT SKIN CONTACT.
Supplemental Safety and Health
ALSO CONTAINS: VM&P NAPHTHA (SE7555000) 300 PPM, 8%.

==================  Physical/Chemical Properties  ==================

Vapor Pres:50
Vapor Density:>AIR
Spec Gravity:<WATER
Evaporation Rate &amp; Reference:FASTER THAN BU AC
Solubility in Water:SLIGHT
Percent Volatiles by Volume:83%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID RADIATORS/STOVES/DIRECT SUNLIGHT OR
    OTHER HEAT SOURCE.
Hazardous Decomposition Products:CO, CO2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL
    REQUIREMENTS. EMPTY CONTAINER: MAY CONTAIN EXPLOSIVE VAPORS. DON'T
    CUT, PUNCTURE OR WELD ON OR NEARBY. INCINERATION WILL CAUSE
    CONTAINER TO BURST VIOLE NTLY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.