BORDEN INC -- KRYLON WORKABLE FIXATIF ITEM NO. 1306  -- 8010-00F003679
<pre>=====================  Product Identification  =====================

Product ID:KRYLON WORKABLE FIXATIF ITEM NO. 1306
MSDS Date:01/01/1987
FSC:8010
NIIN:00F003679
=== Responsible Party ===
Company Name:BORDEN INC/NORRISTOWN, PA 19404
Emergency Phone Num:(215) 278-2400
CAGE:EO731
=== Contractor Identification ===
Company Name:BORDEN INC/NORRISTOWN, PA 19404
CAGE:EO731
Company Name:KRYLON PRODUCTS
Address:31500 SOLON ROAD
Box:City:SOLON
State:OH
ZIP:44139
Country:US
Phone:800-832-2541/216-566-2917
CAGE:87187

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE  (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 62%.%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 28%
ACGIH TLV:800 PPM

Ingred Name:1-METHOXY-2-PROPANOL ACETATE
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 4.8%

Ingred Name:NITROCELLULOSE RESIN
CAS:9004-70-0
RTECS #:QW0970000
Fraction by Wt: 2.2%

Ingred Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 1.4%
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

=====================  Hazards Identification  =====================

Effects of Overexposure:DIZZY, CONFUSION, WEAKNESS

=======================  First Aid Measures  =======================

First Aid:GET FRESH AIR. IF SPRAYED IN EYES, WASH WITH WATER 15
    MINUTES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CLASS B.
Fire Fighting Procedures:IF SPRAYED NEAR OPEN FLAME, BURNS LIKE A
    BLOWTORCH.
Unusual Fire/Explosion Hazard:IF CAN IS IN A FIRE IT MAY BURST (WITH
    VIOLENCE) DUE TO THE HEAT/RELEASING FLAMMABLE CONTENTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE SOURCES OF IGNITION. SOAK UP WITH
    ABSORBENT MATERIAL. VENTILATE AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE AT TEMPS >120F. CONTENTS
    UNDER PRESSURE/EXPOSURE TO HIGH TEMP MAY CAUSE BURSTING. OID
    RADIATORS/STOVES/SUNLIGHTS/OTHER HEAT SOURCE.
Other Precautions:INCINERATION WILL CAUSE CONTAINER TO BURST VIOLENTLY.
    AVOID INCINERATION OR USE ONLY A STRONG, CLOSED INCINERATOR. AVOID
    PUNURING AS CONTENT WILL ESCAPE RAPIDLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:VENTILATE ADEQUATELY.
Ventilation:VENTILATION TO KEEP BELOW TLV
Protective Gloves:NOT NEEDED
Eye Protection:DESIRABLE; NOT MANDATORY
Supplemental Safety and Health
BUTYL ALCOHOL (EO1400000) 1.%, PLASTICIZER (1000406PS) 0.6%.

==================  Physical/Chemical Properties  ==================

Vapor Density:>1
Spec Gravity:<1
Evaporation Rate &amp; Reference:(BU AC = 1)
Solubility in Water:SLIGHT
Percent Volatiles by Volume:97%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:BURNING SPRAY MAY PRODUCE
    TOXIC/IRRITATING COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WHEN DRY, DISCARD AS NON-DANGEROUS TRASH TO BE
    BURIED OR BURNED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.