MBL INDUSTRIES, INC. -- STAINLESS STEEL MAINTAINER  -- 7930-00F008171
<pre>=====================  Product Identification  =====================

Product ID:STAINLESS STEEL MAINTAINER
MSDS Date:11/01/1985
FSC:7930
NIIN:00F008171
=== Responsible Party ===
Company Name:MBL INDUSTRIES, INC.
Address:3600 W. CARRIAGE DR.
City:SANTA ANA
State:CA
ZIP:92704
Info Phone Num:(714) 557-6505
Emergency Phone Num:(714) 557-6505
CAGE:OO200
=== Contractor Identification ===
Company Name:MBL INDUSTRIES, INC.
Phone:( 714)557-6505
CAGE:OO200

=============  Composition/Information on Ingredients  =============

Ingred Name:NAPHTHALENE  (SARA III)
CAS:91-20-3
RTECS #:QJ0525000
Other REC Limits:10 PPM
OSHA PEL:10 PPM/15 STEL
ACGIH TLV:10 PPM/15 STEL; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Other REC Limits:1000 PPM
OSHA PEL:1800 MG/CUM

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Other REC Limits:1000 PPM
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: NAUSEA. EYES/SKIN:
    IRRITATION. INHALATION: HEADACHE, DIZZINESS
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: NAUSEA. EYES/SKIN: IRRITATION.
    INHALATION: HEADACHE, DIZZINESS.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DON'T INDUCE VOMITING. CALL A PHYSICIAN
    IMMEDIATELY. EYES: FLUSH WITH WATER. IF IRRITATION PERSISTS, SEEK
    MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR. GIVE MOUTH TO
    MOUTH RESUSCITATI ON OR OXYGEN AND CALL A PHYSICIAN IMMEDIATELY.
    SKIN: FLUSH WITH WATER & SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE
Extinguishing Media:WATER FOG, FOAM, CO2, DRY CHEMICAL, HALON
Fire Fighting Procedures:KEEP CONTAINERS COOL. USE EQUIPMENT OR
    SHIELDING TO PROTECT PERSONNEL AGAINST BURSTING OR VENTING
    CONTAINERS. DON'T PUNCTURE OR INCINERATE CONTAINER.
Unusual Fire/Explosion Hazard:EXPOSURE TO TEMPS >120F MAY CAUSE
    BURSTING OR VENTING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH WITH WATER, APPLY AN ABSORBENT MATERIAL
    & DISPOSE. PROVIDE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Ventilation:LOCAL EXHAUST: ADEQUATE
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Pres:40-50
Vapor Density:>AIR
Spec Gravity:<1.0
Evaporation Rate &amp; Reference:(WATER =1): <1
Solubility in Water:SLIGHTLY SOLUBLE
Appearance and Odor:WHITE/SOLVENT ODOR LIGHT MISTY SPRAY

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:DON'T STORE >120F.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DON'T PUNCTURE OR INCINERATE "EMPTY" OR FULL
    CANS. ONCE SPILLS OR LEAKS ARE CLEANED UP. DISPOSE OF WASTE IN
    ACCORDANCE WITH GOVERNMENTAL ORDINANCES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.