ZYNOLYTE PRODUCTS CO -- ZYNOLYTE 1000F,HI-TEMP SPRAY PAINT -- 8010-00N006429
===================== Product Identification ===================== Product ID:ZYNOLYTE 1000F,HI-TEMP SPRAY PAINT MSDS Date:01/01/1985 FSC:8010 NIIN:00N006429 === Responsible Party === Company Name:ZYNOLYTE PRODUCTS CO Emergency Phone Num:213-604-1333 CAGE:25461 === Contractor Identification === Company Name:ZYNOLYTE PRODUCTS CO Address:2320 E DOMINGUEZ ST Box:6244 City:CARSON State:CA ZIP:90749 Country:US Phone:310-513-0700 CAGE:25461 ============= Composition/Information on Ingredients ============= Ingred Name:CHLORINATED HYDROCARBON Fraction by Wt: 10% ACGIH TLV:100 PPM (MFR) Ingred Name:METHYLENE CHLORIDE (SARA III) CAS:75-09-2 RTECS #:PA8050000 Fraction by Wt: 40% OSHA PEL:500 PPM/C,1000; Z2 ACGIH TLV:50 PPM, A2; 9192 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:AROMATIC HYDROCARBON Fraction by Wt: 5-9% ACGIH TLV:200 PPM (MFR) Ingred Name:ALIPHATIC HYDROCARBON Fraction by Wt: 5-25% ACGIH TLV:500 PPM (MFR) Ingred Name:ISOBUTANE/PROPANE PROPELLANT Fraction by Wt: 30% ===================== Hazards Identification ===================== Effects of Overexposure:EYE: IRRITATION. VAPORS: ANESTHETIC ======================= First Aid Measures ======================= First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CALL PHYSICIAN. INHALATION: REMOVE FROM EXPOSURE,GIVE ARTIF RESP IF NEEDED,CONSULT PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point:<20F/-6C Extinguishing Media:FOAM,CO*2,DRY CHEM Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL EXPOSED CONTAINERS Unusual Fire/Explosion Hazard:CLOSED CONTAINERS WILL EXPLODE WHEN EXPOSED TO EXTREME HEAT. ================== Accidental Release Measures ================== Spill Release Procedures:SECURE SOURCES OF IGNITION,CONTAIN SPILL, PICKUP WITH ABSORBENT & NON SPARKING TOOLS. VENTILATE AREA ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C. DO NOT SMOKE, ARK WELD, FLAME CUT OR BRAZE IN AREA OF USE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH EXPOSURE OF CONCERN Ventilation:LOCAL/MECHANICAL Eye Protection:SAFETY GLASSES Supplemental Safety and Health ================== Physical/Chemical Properties ================== Vapor Density:>1 Spec Gravity:1.09 Evaporation Rate & Reference:<1 (ETHER) Percent Volatiles by Volume:85 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES Stability Condition to Avoid:STORAGE ABOVE 120F/48C Hazardous Decomposition Products:HCL,PHOSGENE ==================== Disposal Considerations ==================== Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.