BORDEN INC -- 1601,  KRYLON INT./EXT. ENAMEL OR ENGINE COLOR  -- 8010-00-132-2863
<pre>=====================  Product Identification  =====================

Product ID:1601,  KRYLON INT./EXT. ENAMEL OR ENGINE COLOR
MSDS Date:12/04/1986
FSC:8010
NIIN:00-132-2863
=== Responsible Party ===
Company Name:BORDEN INC
Address:180 E BROAD ST
Box:208
City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Info Phone Num:614-225-6124
Emergency Phone Num:614-431-6600  OR  614-225-6124
CAGE:07982
=== Contractor Identification ===
Company Name:BORDEN INC
Address:180 E BROAD ST
Box:208
City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:07982
Company Name:KRYLON PRODUCTS
Address:31500 SOLON ROAD
Box:City:SOLON
State:OH
ZIP:44139
Country:US
Phone:800-832-2541/216-566-2917
CAGE:87187

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 30-50%
Other REC Limits:750 PPM
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:N-BUTYL ALCOHOL (SARA III)
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 1-5%
Other REC Limits:50 PPM
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 15-30%
Other REC Limits:1000 PPM
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 15-30%
Other REC Limits:200 PPM
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:METHYL ISOBUTYL KETONE (SARA III)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 1-5%
Other REC Limits:50 PPM
OSHA PEL:100 PPM/75 STEL
ACGIH TLV:50 PPM/75 STEL; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:1-METHOXY-2-PROPANOL ACETATE, PROPYLENEGLYCOL MONOMETHYL
    ETHER ACETATE
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 5-15%

Ingred Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 1-5%
Other REC Limits:100 PPM
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 5-15%
Other REC Limits:100 PPM
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE:CAUSES IRRITATION. SKIN:CAUSES
    IRRITATION. NOT EXPECTED TO BE HARMFUL BY SKIN ABSORPTION.
    INHALED:MAY BE HARMFUL IF INHALED. LIQUID OR VAPOR CAN CAUSE
    IRRITATION OF NOSE, THROAT AND LUNGS. INGESTE D:NOT EXPECTED TO BE
    HARMFUL UNDER NORMAL CONDITIONS OF USE.
Explanation of Carcinogenicity:MANUFACTURER GAVE NO COMMENTS OTHER THAN
    THE ABOVE REFERENCES TO THE THREE LISTINGS.
Effects of Overexposure:MFR LISTED NO SYMPTOMS. FROM THE HEALTH HAZARDS
    DESCRIBED ON THE MSDS, HMIS BELIEVES THAT IRRITATION OF THE EYES,
    SKIN, RESPIRATORY OR G/I SYSTEM WILL BE THE SYMPTOMS ENCOUNTERED.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN ON MSDS BY
    MFR.

=======================  First Aid Measures  =======================

First Aid:IF IRRITATION PERSISTS OR IS SEVERE, SEE A DOCTOR.  EYE:FLUSH
    W/WATER 15 MIN, HOLD LIDS OPEN. SKIN:WASH WITH SOAP & WATER. REMOVE
    CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. INHALED:REMOVE TO
    FRES H AIR. AID/RESTORE BREATHING IF NECESSARY. INGESTED:IF
    ACCIDENTLY SWALLOWED, DILUTE BY DRINKING LARGE QUANTITIES AND
    IMMEDIATELY CONTACTING POISON CONTROL CENTER OR GETTING OTHER
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:EXTREME FLAMMABL
Extinguishing Media:DRY CHEMICAL, FOAM OR CO2
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, BUT SHOULD BE USED
    TO KEEP FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMPERATURE MAY CAUSE
    BURSTING. AVOID RADIATORS, STOVES, DIRECT SUNLIGHT, OR OTHER HEAT
    SOURCE. DO NOT PUNCTURE OR INCINERATE CONTAINER

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP WITH
    ABSORBENT MATERIAL & REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
    ENTRY INTO NATURAL BODIES OF WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE AT TEMPERATURES >120F.
    AVOID PROLONGED/REPEATED CONTACT WITH EYES, SKIN OR CLOTHING. AVOID
    BREATHING VAPOR OR MIST.
Other Precautions:USE WITH ADEQUATE VENTILATION. AVOID CONTACT WITH
    SKIN OR EYES. WASH THOROUGHLY AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORY PROTECTION
    EQUIPMENT IF >PEL/TLV. SELECT RESPIRATOR I/A/W OSHA 29CFR1910.134.
Ventilation:SUFFICIENT VENTILATION IN VOLUME AND FLOW PATTERN SHOULD BE
    PROVIDED TO KEEP AIR CONTAMINANT CONCENTRATION BELOW PEL/TLV
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:NO INFORMATION GIVEN ON MSDS BY MFR.
Work Hygienic Practices:MFR: ?	HMIS:USE GOOD INDUSTRIAL HYGIENE
    PRACTICE. AVOID UNNECESSARY CONTACT. WASH THOROUGHLY BEFORE EATING
    OR DRINKING.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:V3
NRC/State Lic Num:NONE
Vapor Density:>AIR
Spec Gravity:<WATER
Evaporation Rate &amp; Reference:FASTER THAN BU AC
Solubility in Water:SLIGHT
Appearance and Odor:NO INFORMATION GIVEN ON MSDS BY MFR.
Percent Volatiles by Volume:81-89

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NO INFORMATION GIVEN ON MSDS BY MFR.
Stability Condition to Avoid:NO INFORMATION GIVEN ON MSDS BY MFR.
Hazardous Decomposition Products:CO, CO2
Conditions to Avoid Polymerization:WILL NOT OCCUR

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDERAL REQUIREMENTS. EMPTY CONTAINER MAY CONTAIN EXPLOSIVE VAPORS.
    DON'T CUT PUNCTURE OR WELD ON OR NEARBY. INCINERATION WILL CAUSE
    CONTAINER TO BURST	VIOLENTLY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.