CRAMER PRODUCTS INC -- CRAMER TUF-SKIN, ORIGINAL  -- 6810-00N017694
<pre>=====================  Product Identification  =====================

Product ID:CRAMER TUF-SKIN, ORIGINAL
MSDS Date:10/25/1988
FSC:6810
NIIN:00N017694
=== Responsible Party ===
Company Name:CRAMER PRODUCTS INC
Address:153 W WARREN
City:GARDNER
State:KS
ZIP:66030
Country:US
Info Phone Num:913-884-7511
Emergency Phone Num:913-884-7511
CAGE:24719
=== Contractor Identification ===
Company Name:CRAMER PRODUCTS INC
Address:153 WEST WARREN ST
Box:City:GARDNER
State:KS
ZIP:66030-1151
Country:US
Phone:913-856-7511
CAGE:24719

=============  Composition/Information on Ingredients  =============

Ingred Name:HYDROCARBON PROPELLANT
Fraction by Wt: >25%
ACGIH TLV:1000 PPM (MFR)

Ingred Name:ISOPROPYL ALCOHOL
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: <60%
OSHA PEL:400 PPM;500 PPM STEL
ACGIH TLV:400 PPM;500 PPM STEL

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:UNKNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. IMMEDIATELY GIVE OXYGEN. GET MD
    IMMEDIATELY. EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MD
    IMMEDIATELY. INGEST:CALL MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:-50F,-46C
Lower Limits:2%
Upper Limits:12%
Extinguishing Media:DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . THIS IS AN AEROSOL PRODUCT. USE PROCEDURES
    FOR FLAMMABLE AEROSOLS.
Unusual Fire/Explosion Hazard:CONTENTS ARE VERY FLAMMABLE AND UNDER
    PRESSURE; IF RELEASED WOULD ADD TO FIRE INTENSITY. RUPTURING
    CONTAINERS MAY BECOME PROJECTILES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. SMALL
    SPILLS SHOULD BE FLUSHED WITH LARGE QUANTITIES OF WATER. LARGER
    SPILLS SHOULD BE COLLECTED FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PRODUCT IS AN AEROSOL. DO NOT USE NEAR
    FIRE, FLAME OR HOT SURFACES. DO NOT PUNCTURE OR INCINERATE. DO NOT
    EXPOSE TO HEAT OR STORE AT TEMPS ABOVE 120F.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NONE REQUIRED IN NORMAL USE. AS WITH ALL
    SPRAYS, BREATHING MIST SHOULD BE AVOIDED.
Ventilation:USE IN WELL VENTILATED AREA.
Protective Gloves:NOT REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V3
Vapor Pres: 42 PSIG
Vapor Density:>1
Evaporation Rate &amp; Reference:2.3 (BUTYL ACETATE=1)
Solubility in Water:PARTIALLY
Appearance and Odor:LIGHT YELLOW SPRAY; LEAVES A TACKY RESIDUE
Percent Volatiles by Volume:>85

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ANHYDRIDE, ISOCYANATES, ORGANOMETALLICS, OXYGEN AND OXIDIZERS.
Stability Condition to Avoid:AVOID HEAT, SPARKS, AND OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR BURNING MAY
    PRODUCE CARBON MONOXIDE AND/OR CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL,
    COUNTY, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.